Theoutsidesurfaceofthecarshallbesmoothandsmoothwithoutobviousdefects.Thefont,size,positionandcolorofthelogoontheoutsidesurfaceofthecarareconsistentwiththedesignrequirementsinthedrawings.
The outside surface of the car shall be smooth and smooth without obvious defects.
The font, size, position and color of the logo on the outside surface of the car are consistent with the design requirements in the drawings.
The thickness of surface paint shall not be less than 110 m, and the thickness of interior paint shall not be less than 220 m.
Reflective signs shall be uniformly pasted with a size of 300 mm and an interval of 80-100 mm.
Hinge, door buckle position is correct, visual no skew, fastening in place;
The front door open Angle 90 °, or forward closely with self-locking;
The front door should be opened flexibly. The welding seam at the bend of the front door frame should be smooth and rust-proof paint should be applied after polishing.
The inside and outside surface of the car is clean, the inside and outside skin is smooth and smooth, the color is consistent, without obvious defects;
The welds are firmly welded with smooth welds without obvious defects;
Correct position of trademark spray words;
Body size: 2000 x 1100 x 1200
Body material :Q235
The thickness of box body plate is 4mm
Box volume: 2.5 cubic meters
The outside surface of the car shall be smooth and smooth without obvious defects.
The font, size, position and color of the logo on the outside surface of the car are consistent with the design requirements in the drawings.
The thickness of surface paint shall not be less than 110 m, and the thickness of interior paint shall not be less than 220 m.
Reflective signs shall be uniformly pasted with a size of 300 mm and an interval of 80-100 mm.
Hinge, door buckle position is correct, visual no skew, fastening in place;
The front door open Angle 90 °, or forward closely with self-locking;
The front door should be opened flexibly. The welding seam at the bend of the front door frame should be smooth and rust-proof paint should be applied after polishing.
The inside and outside surface of the car is clean, the inside and outside skin is smooth and smooth, the color is consistent, without obvious defects;
The welds are firmly welded with smooth welds without obvious defects;
Correct position of trademark spray words;
Body size: 2000 x 1100 x 1200
Body material :Q235
The thickness of box body plate is 4mm
Box volume: 2.5 cubic meters
